Estimate Free

 

 

How do you feel about What Would Cause My Electric Water Heater to Stop Working??

Several modern-day houses utilize an electric hot water heater for their furnace, because of its benefit and ease of use. Nonetheless, much like any other electrical appliances, troubles may occur with its use, unexpectedly. It can be really irritating to get up to a cold shower as opposed to a warm one or having your bath with water that isn't warm adequate and even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. Luckily, we've made a checklist of feasible solutions to your hot water heater problems. There are a number of variables that might cause much of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for security. Whatever the problem is, getting it taken care of should not posture too much of a concern if you comply with these actions:

 

Call A Professional:

If after changing all defective parts as well as resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for a specialist opinion. The trouble with your heater could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of hot water needed in your house. Whatever the case might be, a professional plumber would certainly aid resolve the trouble.

 

Check Your Power Supply:

As fundamental as this might seem, it is extremely necessary. Without sufficient power, your hot water heater will not function. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any kind of broken or damaged fuse. Examine the appliance with power after these modifications to see if it's currently functioning.

 

Check Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open up the accessibility panel and also press the red button for temperature reset over the thermostat. This must help warm the water. Transform the breaker back on and inspect if the issue has actually been settled.

 

Check the Heating Element in the Water Heater:

If it's not a power issue, after that attempt looking into your burner if it is still working. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards check whether the hot water is back on.

 

Conclusion

Water heater problems are not always major. A number of them are because of minor problems like a blown fuse or worn-out burner. Changing the malfunctioning components must work. Nevertheless, if you are still not able to fix the issue, give a call to your nearby plumber to find to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you enjoyed our part on No Hot Water — Water Heater Repair. Thanks a ton for taking a few minutes to read through our posting. Do you know someone else who is occupied with the niche? Feel free to promote it. Kudos for your time. Visit us again soon.

More Details